Production Modeling And Simulation Page: 1

1. Ability to define custom manufacturing equipment and add to repository (5 product(s) support this feature)
2. Ability to define custom manufacturing equipment parametrically (5 product(s) support this feature)
3. Ability to enter dimensions for workspace (5 product(s) support this feature)
4. Ability to identify locations for materials and operating materials on workspace (5 product(s) support this feature)
5. Allow activities to be grouped to be worked on together (4 product(s) support this feature)
6. Allow cross-sectioning to evaluate clearances (4 product(s) support this feature)
7. Allow for item penetration or insertion negative clearance (4 product(s) support this feature)
8. Allow machine tool parameters and capabilities to be modeled (4 product(s) support this feature)
9. Allow modeling of NC machine material handling devices tool changers tools etc (4 product(s) support this feature)
10. Allow user-defined proximity allowance (4 product(s) support this feature)
11. Assembly checking and optimization (4 product(s) support this feature)
12. Asset cost associated with manufacturing equipment in layout (5 product(s) support this feature)
13. Associate production operations and activities with work stations (4 product(s) support this feature)
14. Automatically level load work stations (5 product(s) support this feature)
15. Calculate and display cycle times and motion efforts (4 product(s) support this feature)
16. Calculate workstation and line cycle times (4 product(s) support this feature)
17. Capture inspection data in a log for later retrieval (4 product(s) support this feature)
18. Compare as-inspected to data to identified design tolerances (4 product(s) support this feature)
19. Compare as-simulated item results to as-designed item and flag deviations (4 product(s) support this feature)
20. Compare measured as-inspected data to as-designed model (4 product(s) support this feature)
21. Define resource availability by line and workstation (4 product(s) support this feature)
22. Detect collisions between material and resources (4 product(s) support this feature)
23. Detect collisions between robots with materials or with other resources fixtures etc (3 product(s) support this feature)
24. Determine and probing sequences (4 product(s) support this feature)
25. Determine optimal weld point distribution for item (4 product(s) support this feature)
26. Develop 3-D models of the work cell (4 product(s) support this feature)
27. Drag and drop materials in relation to each other (4 product(s) support this feature)
28. Enforce axis speed axis over travel and maximum speed parameters (4 product(s) support this feature)
29. Evaluate impact of product mix changes on-line and work stations (4 product(s) support this feature)
30. Evaluate impact of product sequence changes on-line and work stations (4 product(s) support this feature)
31. Flag collisions between robots materials transport devices and weld guns (4 product(s) support this feature)
32. Flag near misses and collisions based on acceptable tolerance (4 product(s) support this feature)
33. Flag over- or under-utilized resources or workstations (4 product(s) support this feature)
34. Flag workstations that exceed TAKT time (4 product(s) support this feature)
35. Generate an interference curve automatically for collisions (4 product(s) support this feature)
36. Generate control code for the robots (4 product(s) support this feature)
37. Generate inspection programs in DMIS format (4 product(s) support this feature)
38. Generate item movement paths (4 product(s) support this feature)
39. Generate optimal insertion and extraction paths (4 product(s) support this feature)
40. Generate optimal travel paths for CMM machines (4 product(s) support this feature)
41. Generate robot travel paths (3 product(s) support this feature)
42. Identify critical path for workstations and lines using Gantt charts (4 product(s) support this feature)
43. Identify material flow on-line-workspace layout (5 product(s) support this feature)
44. Import 3-D item geometry from CAD system (4 product(s) support this feature)
45. Import 3-D item geometry from CAD system (4 product(s) support this feature)
46. Import 3-D item geometry from CAD system (4 product(s) support this feature)
47. Import 3-D item geometry from CAD system (4 product(s) support this feature)
48. Import 3-D item geometry from CAD system (4 product(s) support this feature)
49. Import weld point information (4 product(s) support this feature)
50. Include setup and breakdown time in line workstation and line load (4 product(s) support this feature)